TESTMODE > FAX > MODEMItem DescriptionAdj/set/operate method Enter the setting value, and then press Apply key.Caution Be sure to set the value back to 0 after the test.Display/adj/set range 0 to 90: OFF1: 300 bps2: 2400 bps3: 4800 bps4: 7200 bps5: 9600 bps6: TC7200 bps7: TC9600 bps8: 12000 bps9: 14400 bpsDefault value 0DTMFTXTitle DTMF transmission testDetails To test whether the specified DTMF signal is transmitted.By closing or opening the DC circuit in accordance with the setting value, the specified DTMF signal istransmitted by the DTMF transmission function of the modem.Check this with the speaker.Adj/set/operate method Enter the setting value, and then press Apply key.Caution Be sure to set the value back to 0 after the test.Display/adj/set range 0 to 120: OFF1: 12: 23: 34: 45: 56: 67: 78: 89: 910: 011: *12: #Default value 0Supplement/memo DTMF (Dual Tone Multi Frequency): Signal method combining two specific frequencies like a push-tonephone.V34G3TXTitle V.34 G3 signal transmission testDetails To test whether the specified V.34 G3 signal is transmitted.By closing or opening the DC circuit in accordance with the setting value, the specific G3 signal pattern istransmitted at the specified transmission speed and modulation speed by the G3 signal transmission func-tion (V.34) of the modem.Check this with the speaker.A setting value other than 0 is indicated as a 3-digit integer (1st digit: modulation speed, last 2 digits:transmission speed).A value other than the specified numerical value is invalid.Adj/set/operate method Enter the setting value, and then press Apply key.Caution Be sure to set the value back to 0 after the test.8. Service Mode311
