9. Enter service mode, and set the following item to "0".• COPIER > OPTION > USER > SMD-EXPTTNRB-SW : 0SCALL-SW : 0SCALLCMP : 0PC-MODE : 0SMD-EXPT : 1NOTE:The [SMD-EXPT] setting can be specified either from the Control Panel or from the remote UI.List of Items Which Can Be ImportedThe following shows the items to be imported for this model.Note that the setting values are not imported in cases such as below:• Items which are originally not included in a DCM file (e.g.:"Settings/Registration Basic Information" of a DCM file exportedusing service mode)• Not included in the import coverage (Cases A to C)• There are no options and functions related to setting valuesThe import coverage shown in the table below is as shown below. Those that are not described here cannot be imported.Import coverage DescriptionCase A: The same machine Import to the same machine (for backup and restoration, etc.)Case B: The same model Import to a different machine of the same model (the same series)Case C: Different model Import to a different machine of a different model (a different series)■ Settings/Registration Basic Information● PreferencesSetting Information Case A Case B Case CVolume SettingsFax Volume Yes Yes YesRing Tone Yes Yes YesTX Done Tone Yes Yes YesRX Done Tone Yes Yes YesScanning Done Tone Yes Yes YesEntry Tone Yes Yes YesInvalid Entry Tone Yes Yes YesRestock Supplies Tone Yes Yes YesWarning Tone Yes Yes YesJob Done Tone Yes Yes YesEnergy Saver Alert Yes Yes YesOriginal in Feeder Detection Tone Yes Yes YesDisplay SettingsDefault Screen after Startup/Restoration Yes Yes YesLanguage Yes Yes Yes2. Technical Explanation73
