COPIER > FUNCTION > SPLMANItem DescriptionAdj/set/operate method 1. Enter the setting value, and then press Apply key.2. Turn OFF/ON the main power switch.Display/adj/set range 0 to 1Default value 0SPL32620Title Switching to enable / disable PC-less updateDetails To switch whether to enable the PC-less update function.Adj/set/operate method 1. Enter the setting value, and then press Apply key.2. Turn OFF/ON the main power switch.Display/adj/set range 0 to 10 : Disabled1 : Enabled (default)Default value 1SPL60061Title Switching to display the connection destination URL setting of GoogleCloudPrint on the remote UIDetails To display the connection destination URL setting of GoogleCloudPrint on the remote UI.Adj/set/operate method 1. Enter the setting value, and then press Apply key.2. Turn OFF/ON the main power switch.Display/adj/set range 0 to 10: Do not display1: DisplayDefault value 0*: FAX model only■ INSTALLCOPIER > FUNCTION > INSTALLItem DescriptionSTRD-POSTitle Scan position auto adj in ADF modeDetails To adjust the ADF scanning position automatically.Use case At ADF installation/uninstallationAdj/set/operate method 1. Set a paper for stream reading position adjustment, and then close the ADF.2. Select the item, and then press Yes key. The operation automatically stops after the adjustment.3. Write the value displayed by COPIER > ADJUST > ADJ-XY > STRD-POS in the service label.Caution Write the adjusted value in the service label.Related service mode COPIER > ADJUST > ADJ-XY > STRD-POSE-RDSTitle ON / OFF of Embedded-RDSDetails To set ON / OFF of Embedded-RDS function.Use case When using Embedded-RDSAdj/set/operate method 1. Select the item, and then press Yes key.2. Turn OFF / ON the main power switch.Caution Be sure to use ERDS, RGW-PORT, COM-TEST, COM-RSLT, and COM-LOG as a set.Display/adj/set range 0 to 1 0 : OFF 1 : ONDefault value 0Related service mode COPIER > FUNCTION > INSTALL >COPIER > FUNCTION > INSTALL > RGW-PORTCOPIER > FUNCTION > INSTALL > COM-TESTCOPIER > FUNCTION > INSTALL > COM-RSLTCOPIER > FUNCTION > INSTALL > COM-LOGSupplement/memo Embedded-RDS: Function to send device information such as the device counter, failure, and con-sumables to UGW via SOAP protocolUGW (Universal Gate Way): Remote monitoring service systemRGW-PORT8. Service Mode288
