4. Removing the Rear Cover1) Remove the ten mounting screwsq, and remove the rear cover w.5. Sliding Out the Hopper Assembly1) Open the front door, and open thehopper cover q. Remove the threemounting screws e; then, removethe three mounting screws w, andconnector cover. Disconnect theconnector, and slide out the hopperr to the front and turn it.Check to make sure that the con-nector is connected beforeinstalling the hopper assembly.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-17COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 7-408q qqwqFigure 7-409qw erCaution:
