CHAPTER 9 INSTALLATION9-27COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)WorkAdjust the size guide plate to suit theneeds of the user, and place copypaper in the cassette and the paperdeck.Attach the appropriate stickers to thepaper size plate of the paper deckand the cassettes.Slide the cassette and the paperdeck into the machine.Attach the variable size cassettesticker to the cassette 4 to suit theuser’s needs.Insert the copy tray to the copier.When the wait period ends, startservice mode. (Press the serviceswitch with a clip through the hole inthe inside upper left cover.)Select ‘TONER-S’ (*4*), and pressthe user mode key *.↓Check that ‘CHECK THEDEVELOPER’ is indicated.↓After making sure that the developingassembly is installed, press the OKkey.↓Press the user mode key *.↓Toner is supplied (from hopper todevelop); (about 8 to 10 min).↓↓Press the Reset key twice to leaveservice mode.Step67891011Remarks• Close the front door so that the inside is freeof light.• The mode lasts about 10 min (max.) tosupply toner from the hopper to thedeveloping assembly.Do NOT turn off the power while themachine is operating.Caution:Variable size cassette sticker
