Note:10) Set the control paper size.10-1) Use the DIP switch on the Copy Data Controller-A1 and the Ten Key Pad-A1 tochange the control paper size. If the default represents the control paper size, goto step 11).10-2) Use the / key to scan through the paper sizes. (However, control paper size5 ‘OTH’ cannot be changed and is not displayed.)EX1:1. The display shows .2. Press the key.3. The display shows .4. Press the key.5. The display shows .6. Press the key.7. The display shows .8. Press the key.9. The display shows .10.Press the key.11.The display shows .EX2:To change B4 to LGL, control paper size 3,1. Press the / key so that the display shows .2. Look for the value that represents LGL from Table 9-506 (conversion table);press q e.3. The display shows .4. Press the key.5. The display shows to indicate the end of the operation.1. You cannot make multiple paper size codes for SIZE1 through 4.2. The counter reading remains intact after changing the size.SIZE 3 =LGLENTSIZE 3 =13SIZE 3 =B4SIZE 2 =A4SIZE 3 =B4SIZE 4 =B5SIZE 3 =B4SIZE 2 =A4SIZE 1 =A3CHAPTER 9 INSTALLATION9-52 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
