9) Set the mode of control.9-1) Set the mode of control using the Ten Key Pad-A1.Press / until the display shows .9-2) According to the type of copier and the specifications of the user, set the mode ofcontrol as indicated. (The default is ‘1’.)Table 9-5059-3) To select ‘3’ as the mode of control, for example,1. The display shows . Since the default is ‘1’, change it to ‘3’.Press the e key.A press on the C key clears the input, allowing you to try again.A press on the key cancels the operation.2. When the display shows , press the key.3. The display shows , and the cursor flashes for a while to indicate thatformatting is under way. Then, the cursor stops flashing to indicate that ‘3’ hasbeen selected for the mode of control.Setting a new mode of control clears such data as the unit price, upper limit, counterreading, and ID. Set them again as necessary.FORMAT=3_ENTFORMAT=3_ESCFORMAT=1FORMAT=1CHAPTER 9 INSTALLATION9-51COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Note:No.123No. of groups300010001000Paper size555Mode—one-sided/two-sidedmono/2-color/full-color
