II. DETECTING JAMSA. OutlineThe side paper deck is equipped with the two sensors shown in Figure 8-201 usedto check if copy paper is moving correctly.The copier’s microprocessor reads in the signals from the sensors at such times asprogrammed in advance to identify a jam. When the copier’s microprocessor identifies ajam, it discharges all sheets moving ahead of the jam, and then stops the machine.Thereafter, the DC controller will show instructions on how to remove the jam on thecopier’s jam.Figure 8-201Table 8-201Q106Q107CHAPTER 8 PAPER DECK-A18-17COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Notation Name FunctionQ106 Deck vertical path sensor Delay/stationary jamQ107 Deck pick-up sensor Delay/stationary