Set the DIP switch (SW5-4) to OFF if the user intends to use Control Card V or onlyuse remote control by the Copy Data Controller-A1, i.e., if the user wants no morethan such functions as ID input, control by paper size, control by toner color, controlby copying mode, and control by paper type.Table 9-501CHAPTER 9 INSTALLATION9-41COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Note:SW1SW5Bit1~345612345, 6PositionOFFONOFFONOFFONOFFONOFFONOFFONOFFONOFFOFFDescriptionSelects normal operation.Selects IPC communication.Selects serial communication.Selects the use of a central controldevice.Selects normal operation or remotecontrol using commercially availablemodems.RAM clear.Selects normal operation.For factory use.Selects normal operation.Selects control of inch-configured(11 × 17, LTR, LGL, STMT) paper.Selects AB-configured (A3, A4, B4,B5) paper.Selects service mode operation.Selects normal operation.Selects group control.De-selects group control.Reserved.RemarksIf this model.If existing machine.Requires a Copy Data InterfaceBoard-B1.Requires a commercially availablemodem and a Copy Data InterfaceBoard-B1 if remote control using com-mercially available modems is desired.To select a size other than those onthe left, use service mode. See 10)under “C. Checking Operation.”See Note.
