Caution:Keep the following in mind when using ‘DOC-ST’, ‘P-INTRVL’, and ‘LA-SPEED’:1. These items operate on the memory settings of the RDF controller PCB. Youneed not enter the settings if you merely initialized the copier's RAM, since theyare retained by the RDF.2. The items are used to change the memory settings of the RDF controller PCB,and will not directly feed settings to the memory on the RDF controller PCB; theoperation will be as follows:If you enter ‘5’ for ‘DOC-ST’ in place of the existing ‘2’, 5 – 2 = +3, shifting theoriginal stop position by +3.If you enter ‘7’ for ‘P-INTRVL’ in place of the existing ‘5’, –7 – (–5) = –2, changingthe sheet-to-sheet distance by –2.3. These items relate to SW1 on the RDF controller PCB; pick-up and deliverysettings will be by the user mode key (*) on the copier's control panel.CHAPTER 11 TROUBLESHOOTING11-225COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)NEW OLD
