Configuring System Information 111• End Day — Select the ending day number. This field displays only when the Recurring check box isselected.• End Month — Select the ending month.• End Time — Select the ending time in hh:mm format.• End Date — Select the ending date. This field displays only when the Recurring check box is cleared.• End Year. — Select the ending year. This field displays only when the Recurring check box is cleared.• Offset — Set the number of minutes to add during summer time in the range 0 to 1440.• Zone — Set the acronym of the time zone to be displayed when summer time is in effect.Defining the Summer Time Parameters1. Open the Summer Time Configuration page.2. Define the fields as needed.3. Click Apply Changes.The summer time settings are modified, and the device is updated.Configuring Summer Time Parameters Using CLI CommandsFor information about the CLI commands that perform this function, see the Clock Commands chapterin theCLI Reference Guide. The following table summarizes the equivalent CLI commands you use toconfigure summer time parameters.Clock DetailUse the Clock Detail page to set the time and date or view information about the current time, timezone, and summer time settings.To display the Clock Detail page, click System →General →Clock Detail in the tree view.Table 6-6. Summer Time Parameters CommandsCLI Command Descriptionclock summer-time recurring Sets the summertime offset to UTC recursively every year.clock summer-time date Sets the summertime offset to UTC.no clock summer-time Resets the recurring summertime configuration.
