134 Configuring System InformationThe Default Domain Name page contains the following field:• Default Domain Name (0–255 characters) — Contains the user-defined default domain name. Whenconfigured, the default domain name is applied to all unqualified host names.Defining DNS Domain Names Using CLI CommandsFor information about the CLI commands that perform this function, see the IP Addressing Commandschapter in theCLI Reference Guide. The following table summarizes the equivalent CLI commands youuse to define DNS domain names.Host Name MappingUse the Host Name Mapping page to assign an IP address to a static host name. The Host NameMapping page provides one IP address per host.To display the Host Name Mapping page, click System →IP Addressing →Host Name Mapping.Figure 6-26. Host Name MappingThe Host Name Mapping page contains the following fields:• Host Name — Contains a list of host names. Host names are defined on the Add Static Host NameMapping page. Each host provides one IP address.• IP Address — Provides an IP address that is assigned to the specified host name.• Remove Host Name — Removes the host name IP mapping when checked.Table 6-17. DNS Domain Names CommandsCLI Command Descriptionip domain-name Use to define a default domain name to complete unqualified hostnames.
