260 Configuring System InformationThe ISDP Statistics page contain the following fields:• Packets Received — Displays the number of all ISDP protocol data units (PDUs) received.• Packets Transmitted — Displays the number of all ISDP PDUs transmitted.• ISDPv1 Packets Received — Displays the number of v1 ISDP PDUs received.• ISDPv1 Packets Transmitted — Displays the number of v1 ISDP PDUs transmitted.• ISDPv2 Packets Received — Displays the number of v2 ISDP PDUs received.• ISDPv2 Packets Transmitted — Displays the number of v2 ISDP PDUs transmitted.• Bad Header — Displays the number of ISDP PDUs that were received with bad headers.• Checksum Error — Displays the number of ISDP PDUs that were received with checksum errors.• Transmission Failure — Displays the number of ISDP PDUs transmission failures.• Invalid Format Packets Received — Displays the number of ISDP PDUs that were received with aninvalid format.• Table Full — Displays the number of times the system tried to add an entry to the ISDP table but wasunsuccessful because the table was full.• ISDP IP Address Table Full — Displays the number of times the system tried to add an entry to theISDP IP Address table but was unsuccessful because the table was full.Displaying ISDP Statistics Using CLI CommandsFor information about the CLI commands that perform this function, see the CDP InteroperabilityCommands chapter in theCLI Reference Guide. The following table summarizes the equivalent CLIcommands you use to view ISDP.iSCSI OptimizationsInternet Small Computer System Interface (iSCSI) flow acceleration provides a means of giving trafficbetween an iSCSI initiator and target systems special Quality of Service treatment in the switch. This isaccomplished by monitoring, or snooping, traffic to detect packets used by iSCSI stations in establishingiSCSI sessions and connections. Data from these exchanges is used to create classification rules to assignthe traffic between the stations to a configured traffic class. The traffic classification affects how thepackets in the flow are queued and scheduled for egress on the destination port.Table 6-65. ISDP Statistics CommandsCLI Command Descriptionclear isdp counters Clears the ISDP counters.show isdp traffic Displays ISDP statistics.
