Configuring System Information 137Click Clear All Entries to remove all Host Name IP Mapping entries from the table.Viewing Dynamic Host Entries Using CLI CommandsFor information about the CLI commands that perform this function, see the IP Addressing Commandschapter in theCLI Reference Guide. The following table summarizes the equivalent CLI commands youuse.ARP TableUse the ARP Table page to view ARP parameters for IP interfaces. The ARP table displays the correlationbetween each MAC address and its corresponding IP address.To display the ARP Table page, click System →IP Addressing →ARP in the tree view.Figure 6-30. ARP TableThe ARP Table page contains the following fields:• IP Address — The station IP address, which is associated with the MAC address filled in below.• MAC Address — The station MAC address, which is associated in the ARP table with the IP address.Viewing the ARP Table Using CLI CommandsFor information about the CLI commands that perform this function, see the IP Addressing Commandschapter in theCLI Reference Guide. The following table summarizes the equivalent CLI commands youuse.Table 6-19. Dynamic Host Entries CommandsCLI Command Descriptionshow hosts Displays dynamic host entries that the switch has learned.Table 6-20. ARP Table CommandsCLI Command Descriptionshow arp switch Use to display the entries in the ARP table.
