392 Configuring Switching InformationConfiguring MLD Snooping with CLI CommandsFor information about the CLI commands that perform this function, see the following chapter in theCLI Reference Guide:• IPv6 MLD Snooping CommandsThe following table summarizes the equivalent CLI commands for this feature.MLD Snooping Global Querier ConfigurationUse the MLD Snooping Global Querier Configuration page to configure the parameters for the MLDSnooping Querier.To display the Global Querier Configuration page, click Switching →Multicast Support →MLDSnooping →Global Querier Configuration in the tree view.Table 7-46. MLD Snooping CommandsCLI Command Descriptionipv6 mld snooping immediate-leave Enables or disables MLD Snooping immediate-leave admin mode on aselected interface or VLAN.ipv6 mld snooping groupmembership-intervalSets the MLD Group Membership Interval time on a VLAN orinterface.ipv6 mld snooping maxresponse Sets the MLD Maximum Response time for an interface or VLAN.ipv6 mld snooping mcrtexpiretime Sets the Multicast Router Present Expiration time.ipv6 mld snooping (Global) Enables MLD Snooping on the system (Global Config Mode).ipv6 mld snooping (Interface) Enables MLD Snooping on an interface.ipv6 mld snooping (VLAN) Enables MLD Snooping on a particular VLAN and all interfacesparticipating in that VLAN.show ipv6 mld snooping Displays MLD Snooping information.show ipv6 mld snooping groups Displays the MLD Snooping entries in the MFDB table.
