Configuring Switching Information 347VLAN Port SettingsIn a port-based VLAN, untagged traffic is bridged through specified ports based on the receiving portsPVID. Port-based VLANs can help optimize network traffic patterns because broadcast, multicast, andunknown unicast packets are sent only to ports that are members of the VLAN. Packets that are receivedwith a VLAN tag uses that VLAN ID for the switching process.Use the VLAN Port Settings page to identify a port as part of a VLAN, as well as to define and modifyVLAN port parameters.To display the VLAN Port Settings page, click Switching →VLAN →Port Settings in the tree view.Figure 7-54. VLAN Port SettingsThe VLAN Port Settings page contains the following fields:• Ports — Specifies the Unit and Port included in the VLAN.• Port VLAN Mode — Indicates the port mode. Possible values are:– General — The port belongs to VLANs, and each VLAN is user-defined as tagged or untagged(full 802.1Q mode).Table 7-27. Double VLAN CommandsCLI Command Descriptiondvlan-tunnel ethertype Configures the EtherType for the interface.mode dvlan-tunnel Enables Double VLAN tunneling on the specified interfaceshow dvlan-tunnel Displays all interfaces enabled for Double VLAN Tunneling.show dvlan-tunnel interface Displays detailed information about Double VLAN Tunneling for thespecified interface.
