202 Configuring System Information• MAC Address — Identifies the MAC address of the client (if applicable).• IP Address — Identifies the IP address of the client (if applicable).• User — Displays the user name (or Guest ID) of the connected client.• Protocol — Shows the current connection protocol, which is either HTTP or HTTPS.• Verification — Shows the current account type, which is Guest, Local, or RADIUS.To force the captive portal to disconnect an authenticated client, select the Remove check box next tothe client MAC address and click Apply Changes. To disconnect all clients from all captive portals, clickDelete All.Client DetailThe Client Detail page shows detailed information about each client connected to the network througha captive portal.To view detailed information about the clients connected to the switch through the captive portal, clickSystem →Captive Portal →Client Detail.Figure 6-83. Client DetailThe Client Detail page contains the following fields:• MAC Address — The menu lists each associated client by MAC address. To view status informationfor a different client, select its MAC address from the list.• Client IP Address — Identifies the IP address of the client (if applicable).• CP Configuration — Identifies the CP configuration the client is using.• Protocol — Shows the current connection protocol, which is either HTTP or HTTPS.• Session Time — Shows the amount of time that has passed since the client was authorized.• User Name — Displays the user name (or Guest ID) of the connected client.• Interface — Identifies the interface the client is using.• Verification — Shows the current account type, which is Guest, Local, or RADIUS.
