Configuring IPv6 639OSPFv3 Interface StatisticsUse the OSPFv3 Interface Statistics page to display OSPFv3 interface statistics. Information is onlydisplayed if OSPF is enabled. Several fields have been added to this page.To display the page, click IPv6 →OSPFv3 →Interface Statistics in the tree view.Table 10-17. OSPFv3 Interface CommandsCLI Command Descriptionipv6 ospf Enables OSPF on a router interface or loopback interface.ipv6 ospf areaid Sets the OSPF area to which the specified router interface belongs.ipv6 ospf cost Configures the cost on an OSPF interface.ipv6 ospf dead-interval Sets the OSPF dead interval for the specified interface.ipv6 ospf hello-interval Sets the OSPF hello interval for the specified interface.ipv6 ospf mtu-ignore Disables OSPF maximum transmission unit (MTU) mismatchdetection.ipv6 ospf network Changes the default OSPF network type for the interface.ipv6 ospf priority Sets the OSPF priority for the specified router interface.ipv6 ospf retransmit-interval Sets the OSPF retransmit interval for the specified interface.ipv6 ospf transmit-delay Sets the OSPF Transmit Delay for the specified interface.passive-interface Sets the interface or tunnel as passive.show ipv6 ospf interface Displays the information for the IFO object or virtual interface tables.show ipv6 ospf interface brief Displays brief information for the IFO object or virtual interfacetables.show ipv6 ospf interface vlan Displays OSPFv3 configuration and status information for a specificvlan
