2 Hardware Specifications and WiringDVP-PM Application Manual 2-5Single-ended common point transistoroutput#1ItemSpec Low speed High speedSingle-ended common point#1relay outputdelay time ONOFF 30usOver-current protection N/A DVP-10PMItemSpecDouble-ended differential output Single-ended common pointrelay outputMaximum frequency 1 MHz 200 kHZOutput indicator LED display; light on = ON, light off = OFFOutput point configuration Y10 ~ Y17 Y0 ~ Y3Working voltage 5 VDC 5 ~ 30VDCMax. output current 40 mA 40 mAIsolation Line driver Photocoupler isolationResistive < 25 mA 0.5A/1 點 (4A/COM)Inductive -- 12W (24 VDC)Current spec.Lamp -- 2 W (24 VDC)OFFONMax. outputdelay time ONOFF 0.2 usOver-current protection N/A#1: Y0 ~ Y7 on DVP20PM00D are relay output; FP2+, FP2- on DVP20PM00M are high-speed transistor output, Y2 and Y3 arelow-speed transistor output, Y4 ~ Y7 are relay output. Common point for Y0: C0; common point for Y1: C1; common point for Y2and Y3: C2; common point for Y4~Y7: C3. Output points of DVP10PM are all high-speed transistor outputs, and Y0~Y3 can beused as general output points.#2: The life cycle curve:ContactCurrent(A)200.50.1 0.230500.3 0.7 1 2200300500100100020003000Operation(X10 )3120VAC Resistive30VDC Inductive(t=7ms)240VAC Inductive(cos 0.4)ψ=120VAC Inductive(cos =0.4)ψ100~200VDCInductive (t=7~40ms)30VDCInductive(t=40ms)
