468 OperatingMANUAL CEAG AUtoMAtiC tEst systEM At-s+ 40071860177 (C) December 2016 www.ceag.de8 4 2 Menu 2: “Block, reset”Overview:Main menuTest & status menuBlock,resetBasic settingsDLS/TLS SetupCircuit setupLuminaire setupMemory cardMenu 2Block deviceRelease deviceManual reset Selection ofmenu optionswith the keys :confirm selec-tion -cel and returnto the previousmenu (anychangesentered aresaved) : canceland return tothe previousmenu (anychanges en-tered are notsaved)flashing inputpromptMenu 2.1:(Menu 2.3: only directly at the station) initiates the function if this ope-ration has been activated in the menuoption «Basic settings»:Following a mains power failure, normaloperation will not be resumed automati-cally when mains power is restored ifthe “Manual reset (On)” option has beenactivated (menu «Basic settings/Manualreset»).This guarantees that the emergencylighting remains on until it is ensured thatthe general lighting has been switchedon again, e.g. in a cinema.Block deviceRelease deviceManual resetBlock deviceRelease deviceManual resetThis deviceall devicesDevice address 01Device nameBlock deviceRelease deviceManual reset initiates the function:The selected stations will be swichted freeand restart operation.Selection with the buttons bet-ween the displayed options.Selection of a AT-S+ system withDevice address referes to searchresults in the substation setupmenu 3 «Basic settings»Menu 2.2: This deviceall devicesDevice address 01Device name initiates the function:All functions are cancelled;all outputs will be isolated!In case of mains failure occures no emer-gency operation.These must be additionally separated onall poles before maintenance work in endcircuits. (see 10.3 Enabling of end circuitswith maintenance work)