588 OperatingMANUAL CEAG AUtoMAtiC tEst systEM At-s+ 40071860177 (C) December 2016 www.ceag.de8.4.7 Menu 7 “Logbooksetup” Menu 7.1: Select the log book entries with – Line 1: displays date and time for thedisplayed event– Line 2: displays a message about thenature of the event, e.g. “Luminairefault”with additional information in lines 3and 4– A message is displayed if the opera-tor gets to the end or back to thebeginning of the log book entries ashe scrolls through them. Finish and return to Menu 7 withMenu 7.2:Clear log book?Menu=No OK=YES No deletion and return tomenu 7 “Logbooksetup” : All log book entries on thememory card are deleted!Return to menu 7 “Logbooksetup” Menu 7.3: Save configuration?Menu=No OK=YES No saving and return tomenu 7 “Memory card” : All entries on the memorycard are deleted and overwrittenwith the current system configu-ration!Return to menu 7 “Logbooksetup” Menu 7.4:Load configuration?Menu=No OK=YES The existing system con-figuration is retained and return tomenu 7 “Logbooksetup” : The existing system con-figuration is overwritten with theentries on the memory card!The system is now rebootedReturn to main screenOverview:Main menuTest & status menuBlock & reset alarmsBasic settingsDLS/TLS SetupCircuit setupLuminaire setupLogbooksetupMenu 7Search logbookErase logbookSave configurationLead configuration Selection ofmenu optionswith thekeys :confirm selec-tion -cel and returnto the previousmenu (anychanges en-tered are saved): canceland return tothe previousmenu (anychanges en-tered are notsaved)flashing inputpromptSearch logbookErase logbookSave configurationLead configurationSearch logbookErase logbookSave configurationLead configurationSearch logbookErase logbookSave configurationLead configurationImportant note!Once deleted, log book entries can-not be restored.Important note!The current configuration is ir-revocably overwritten with the newconfiguration!Search logbookErase logbookSave configurationLead configuration11.05.12 12:30:00EventLine 3Line 4Line 3 and 4 may show additional informa-tion about the event displayed in line 2:For a luminaire fault with CG monitoring,e.g.:Line 3: “Circuit No.”Line 4: Address(es) of the faulty luminaire(s):--------------------In the example illustrated, luminaires 6, 13and 14 have a fault – luminaires 3, 10 and16 to 20 are not installed.8.4.8 Menu 8 “Send ServicePinMsg” starts the function (direct from the main menu) This function is provided for service engineers and has no relevance for normal operation.
