578 OperatingMANUAL CEAG AUtoMAtiC tEst systEM At-s+ 40071860177 (C) December 2016 www.ceag.deOverview:Main menuTest & status menuBlock & reset alarmsBasic settingsDLS/TLS SetupCircuit setupLuminaire setupLogbooksetupMenu 6Add / removeLuminaire searchText assignmentsDLS/TLS-Assignment Selection ofmenu optionswith the keys :confirm selec-tion -cel and returnto the previousmenu (anychanges en-tered are saved) : canceland return tothe previousmenu (anychanges en-tered are notsaved)flashing inputprompt Line selection (line 2 and 3) with Select a luminaire in line 2 with keys (line 4 shows “not installed” or theluminaire name) possible selections in line 3 with keys (see table below)If there are two switch assignmentsin line 3, use keys to toggle be-tween these displays. Finish and return to Menu 6 with Menu 6.4:Module8 circuit:2...5.....10.....15....2s.Stromkreis DLS/TLSCircuit name Select the input fields in line 1 withSelect input field with The displays and input options dependon the technical characteristics of theluminaires that are used and on the set-tings made in menu 5 “Circuit set-up”A switch cannot be assigned to individual luminaires unless the options “CG monitor-ing” (compare menu 5.4) and “per luminaire setup” (compare menu 5.5) are selected;the following display appears:Add / removeLuminaire searchText assignmentsDLS/TLS-AssignmentTable of selection options in line 3 for an installed CG-S luminaire“no CG-S function” The luminaire is not individually monitored and notswitchable“Non-maintained mode” The CG-S luminaire is individually monitored andis off in normal operation“Maintained light” The CG-S luminaire is individually monitored andis on in normal operation“Poll1 / Poll2” The CG-S luminaire is individually monitored andit is assigned a certain switch configuration.It can be assigned 2 switches:“DLS xx/y DLS xx/y (OR operation)It can be assigned 1 timer and a switch:“Timer 1 DLS xx/y ”“Timer 2 DLS xx/y ”“Timer 1 & 2 DLS xx/y ”xx: Module number ( 1 to 10) y: Inputs of the module (e.g. for switch interrogation)Module8 circuit:2....5...10...15...20Line 3Luminaire text
