Eaton CEAG AT-S+ Series Mounting And Operating Instructions

Also see for CEAG AT-S+ C30: Operating instructions

Contents

6010 Maintenance / CheckingMANUAL CEAG AUtoMAtiC tEst systEM At-s+ 40071860177 (C) December 2016 www.ceag.de10 Maintenance / Checking10.1 Safety NotesWARNING! RISK OF INJURY!Improper maintenance work can cause serious per-sonal injury and / or material damage This work hasto be performed only by authorised, skilled and ade-quate personnel who have received instructions pro-viding information on the device and in observanceof local safety regulations• Before working on and with the system switch it off andprotect it against reset.• Do not touch the system unti its temperature is as highas the ambient temperature.10.2 General information tomaintenance / checkingThe carrying out of the safety inspections as requiredby statutes and directives has to be made regularly. Theoperator of the emergency lighting system is responsiblefor organising and supervising this work!The following information must be specified in writing andmade available at all times :• The nature and extent of the work• Recording of work results• Responsibilities and permits for carrying out the work– which persons may carry out which operations?– which persons are responsible for supervising thework?• Duties of reporting (e. g. in the case of faults or functiontests)• Organisational measures when working on the Auto-matic Test System. This may include:– Duties of information and reporting on the start, dura-tion and end of the work– Safety measures while the work is being carried out:e. g. standby lighting, power supply isolation and lock-out (e. g. removing the fuses, key-operated switch,safety signage)– Safety equipment for the personnel carrying out thework on the plant (e. g. suitable work clothing andpersonal protection equipment)– Safety equipment providing protection from hazardscaused by adjacent plant (e. g. safety grilles, barriers,making safe or roads)Maintenance and repair work at the AutomaticTest System can be done by the customer serviceof CEAG Notlichtsysteme GmbH at any time (senclosed Customer Service Order)Our customer service locations can be found all overGermany, see the enclosed map „Addresses: CEAGCustomer Service“.In addition, we offer you a Maintenance Contract forEmergency Lighting making organisation easier to you!This contract contains the annual checking and includesthe following work:– Testing of mains/emergency light switchingfunction of devices– Visual check of electrical equipment– Mechanical check at the devices– Operational test of other electronics– Checking of lamps only for luminaires withCG-monitoringNot included in maintenance services is repair andoverhaul work, in particular the replacement of defectiveelectronics or defective light sources.NOTEIn case of returns you need a RMA number from us.For further information see www.ceag.de!