538 OperatingMANUAL CEAG AUtoMAtiC tEst systEM At-s+ 40071860177 (C) December 2016 www.ceag.de8.4.4 Menu 4: “DLS/TLS setup”Overview:Main menuTest & status menuBlock,resetBasic settingsDLS/TLS SetupCircuit setupLuminaire setupMemory cardMenu 4Find DLS/TLSText assignmentsTLS times Selection ofmenu optionswith the keys :confirm selec-tion -cel and returnto the previousmenu (anychangesentered aresaved) : canceland return tothe previousmenu (anychanges en-tered are notsaved)flashing inputpromptMenu 4.1: : The search result is accepted;the parameters will be used by theCU S+ for the controller -ed – the old settings are retainedWhen all possible addresses have beenpolled the procedure is closed and thesystem returns to menu 4 “DLS/TLSSetup” with the new parameters. Finish and return to Menu 4 withThe procedure is necessary, for examplewhen the system is first commissionedor after adding/removing DLS or TLS mo-dules.All addresses are searched in successionfor installed DLS and TLS modules.The icon bar indicates howthe search is progressing.Menu 4.2: Line selection (line 2, 4) with Select a bus address with The message “DLS/TLS Text” appearson line 4 as a default setting or, if alreadydefined, a module name Editing DLS/TLS Text:– Select line 4 with – Select the input point with – All the possible alphanumeric charac-ters are displayed cyclically with thecursor keys .– Once a name has been fully entered,confirm the entry with . Theremaining characters after the cur-rent cursor position are cleared. Finish and return to Menu 4 withFind address: nOSearch resultFind address: nOSearch resultDLS+3Phase monit.Menu=No OK=YESIf no external bus module is found, you willsee the messageSearch resultnot installedIf a bus module has been identified, you willsee the message ...Search resultDLS+3Phase monit.Search resultDLS module externalSearch resultTLS module externalSearch DLS/TLS ...Text assignmentTLS timesText assignmentsDLS+3Phase monit. N oDLS/TLS TextSearch DLS/TLS ...Text assignmentTLS timesNotes:You can use this menu to view assignments withexternal modules and assign/edit module nameswithout changing the configuration.These module names are stored on the memo-ry card and displayed in the graphic displaymenus as operator help. Text assignments can-not be made with the CU S+ if a memory cardis not inserted!A more user-friendly input is possible using aCEAG configuration software with a PC (dataare transmitted by the memory card). Line selection (line 1, 2) with Make changes in the input field withWhen this menu option is selected the systemdisplays the first TLS module number it finds; inthe “Port” input field you can now select fromamong the possible ports of the modules with In line 2 the stairwell light operation times 1 sec,1 ... 15 min can be selected withLine 3 shows the module name (s. menu 4.2). Finish and return to Menu 4 with Menu 4.3: Search DLS/TLS ...Text assignmentTLS timesTLS:N o Port:N oTime 1 minDLS/TLS Text
