558 OperatingMANUAL CEAG AUtoMAtiC tEst systEM At-s+ 40071860177 (C) December 2016 www.ceag.deOverview:Main menuTest & status menuBlock,resetBasic settingsDLS/TLS SetupCircuit setupLuminaire setupMemory cardMenu 5Deactivate moduleSearch ext. modulesText assignmentDLS/TLS-Assignment Selection ofmenu optionswith the keys :confirm selec-tion -cel and returnto thepreviousmenu (anychangesentered aresaved) : canceland return tothepreviousmenu (anychanges en-tered are notsaved)flashing inputpromptMenu 5.4:Module number 1Maintained light (Mains)Maintained light (Emer.)Circuit name Select line 1, 2, 3 or the input fields inline 1 with Successive selection of module and(final) circuit with Line 4 displays the message “Circuittext” or a circuit name (see menu 5.3) Select the settings in line 2 and 3with keys Finish and return to Menu 5 withNotes:The possible settings in line 3 dependpartly on the selection made in line 2Switch assignmentin line 2 in line 3Switch 1 Switch 2Non maintained mode noneMaintained light Maintained light (Emer.)(mains) TLS xx/x (Emer.)per luminaire setup Maintained light (Emer.)TLS xx/x (Emrgcy)Timer 1 Maintained light (Emer.)Timer 2 DLS xx/yTimer 1 & 2 TLS xx/yDLS xx/x Maintained light (Emer.)DLSxx/yTLS xx/yTLS xx/x Maintained light (Emer.)DLS xx/yTLS xx/yFunction keys F1 ... F3 or option inputsZ1 ... Z4 in line 2 can also be declared asswitches (see menus 3.12 and 3.13 in“Basic settings”).Switch assignment is not possible unlessthese variable elements have been as-signed a switch function!xx: Module number ( 1 ... )y: Inputs of the module (e.g. for switchinterrogation) orSwitched outputs of TLS modulesTLS can only be assigned to completecircuits.Notes:Additional options with selectiveemergency light:Switch assignmentin line 2 in line 3Switch 1 Switch 2Non maintained mode noneor 3-phase monitor Maintained light(Emer.)DLS xx/yTLS xx/yMaintained light (mains) Maintained light(Emer.)TLS xx/x (Emer.)per luminaire setup Maintained light(Emer.)TLS xx/x (Emer.)3-phase monitorTimer 1 Maintained light (Emer.)Timer 2 DLS xx/yTimer 1 & 2 TLS xx/y3-phase monitorDLS xx/x Maintained light (Emer.)DLSxx/yTLS xx/y3-phase monitorTLS xx/x Maintained lightsee note at menu 3.7Deactivate moduleSearch ext. modulesText assignmentDLS/TLS-Assignment
