GE Multilin G30 Generator Protection System 6-96 ACTUAL VALUES 6.2 STATUS66.2.14 DIRECT INPUTSPATH: ACTUAL VALUES STATUS DIRECT INPUTSThe AVERAGE MSG RETURN TIME is the time taken for direct output messages to return to the sender in a direct input/outputring configuration (this value is not applicable for non-ring configurations). This is a rolling average calculated for the lastten messages. There are two return times for dual-channel communications modules.The UNRETURNED MSG COUNT values (one per communications channel) count the direct output messages that do notmake the trip around the communications ring. The CRC FAIL COUNT values (one per communications channel) count thedirect output messages that have been received but fail the CRC check. High values for either of these counts may indicateon a problem with wiring, the communication channel, or one or more relays. The UNRETURNED MSG COUNT and CRC FAILCOUNT values can be cleared using the CLEAR DIRECT I/O COUNTERS command.The DIRECT INPUT 1 to DIRECT INPUT (32) values represent the state of each direct input.6.2.15 DIRECT DEVICES STATUSPATH: ACTUAL VALUES STATUS DIRECT DEVICES STATUSThese actual values represent the state of direct devices 1 through 16. DIRECT INPUTSAVG MSG RETURNTIME CH1: 0 msMESSAGE UNRETURNED MSGCOUNT CH1: 0MESSAGE CRC FAIL COUNTCH1: 0MESSAGE AVG MSG RETURNTIME CH2: 0 msMESSAGE UNRETURNED MSGCOUNT CH2: 0MESSAGE CRC FAIL COUNTCH2: 0MESSAGE DIRECT INPUT 1:OnMESSAGE DIRECT INPUT 2:On↓MESSAGE DIRECT INPUT 32:On DIRECT DEVICES STATUSDIRECT DEVICE 1STATUS: OfflineRange: Offline, OnlineMESSAGE DIRECT DEVICE 2STATUS: OfflineRange: Offline, Online↓MESSAGE DIRECT DEVICE 16STATUS: OfflineRange: Offline, Online
