GE G30 Instruction Manual
Also see for G30: Communications manualCommunications guideInstruction manualInstruction manualInstruction manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          | |
Contents
|
GE Multilin G30 Generator Protection System 2-152 PRODUCT DESCRIPTION 2.2 ORDER CODES22.2.4 REPLACEMENT MODULESReplacement modules can be ordered separately. When ordering a replacement CPU module or faceplate, provide theserial number of your existing unit.Not all replacement modules may be applicable to the G30 relay. Only the modules specified in the order codes areavailable as replacement modules.Replacement module codes are subject to change without notice. See the ordering page athttp://www.gegridsolutions.com/multilin/order.htm for the latest options.The replacement module order codes for the horizontal mount units are shown below.7Q Channel 1 - G.703; Channel 2 - 1300 nm, single-mode Laser7R G.703, 1 Channel7S G.703, 2 Channels7T RS422, 1 Channel7W RS422, 2 ChannelsTable 2–8: ORDER CODES FOR REPLACEMENT MODULES, HORIZONTAL UNITSUR - ** - *POWER SUPPLYredundant supply only available in horizontal unitsand must be same type as main supply, for examplemust swap both power supplies when switching fromRH to SH| SH A | 125 / 300 V AC/DC| SL H | 24 to 48 V (DC only)CPU | T | RS485 with 3 100Base-FX Ethernet, multimode, SFP with LC| U | RS485 with 1 100Base-T Ethernet, SFP RJ-45 + 2 100Base-FX Ethernet, multimode, SFP with LC| V | RS485 with 3 100Base-T Ethernet, SFP with RJ-45FACEPLATE/DISPLAY | 3C | Horizontal faceplate with keypad and English display| 3D | Horizontal faceplate with keypad and French display| 3R | Horizontal faceplate with keypad and Russian display| 3A | Horizontal faceplate with keypad and Chinese display| 3P | Horizontal faceplate with keypad, user-programmable pushbuttons, and English display| 3G | Horizontal faceplate with keypad, user-programmable pushbuttons, and French display| 3S | Horizontal faceplate with keypad, user-programmable pushbuttons, and Russian display| 3B | Horizontal faceplate with keypad, user-programmable pushbuttons, and Chinese display| 3K | Enhanced front panel with English display| 3M | Enhanced front panel with French display| 3Q | Enhanced front panel with Russian display| 3U | Enhanced front panel with Chinese display| 3L | Enhanced front panel with English display and user-programmable pushbuttons| 3N | Enhanced front panel with French display and user-programmable pushbuttons| 3T | Enhanced front panel with Russian display and user-programmable pushbuttons| 3V | Enhanced front panel with Chinese display and user-programmable pushbuttons| 3I | Enhanced front panel with German display| 3J | Enhanced front panel with German display and user-programmable pushbuttonsCONTACT INPUTS AND OUTPUTS | 4A | 4 Solid-State (no monitoring) MOSFET outputs| 4B | 4 Solid-State (voltage with optional current) MOSFET outputs| 4C | 4 Solid-State (current with optional voltage) MOSFET outputs| 4D | 16 contact inputs with Auto-Burnishing| 4L | 14 Form-A (no monitoring) Latching outputs| 67 | 8 Form-A (no monitoring) outputs| 6A | 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 contact inputs| 6B | 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 contact inputs| 6C | 8 Form-C outputs| 6D | 16 contact inputs| 6E | 4 Form-C outputs, 8 contact inputs| 6F | 8 Fast Form-C outputs| 6G | 4 Form-A (voltage with optional current) outputs, 8 contact inputs| 6H | 6 Form-A (voltage with optional current) outputs, 4 contact inputs| 6K | 4 Form-C and 4 Fast Form-C outputs| 6L | 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 contact inputs| 6M | 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 contact inputs| 6N | 4 Form-A (current with optional voltage) outputs, 8 contact inputs| 6P | 6 Form-A (current with optional voltage) outputs, 4 contact inputs| 6R | 2 Form-A (no monitoring) and 2 Form-C outputs, 8 contact inputs| 6S | 2 Form-A (no monitoring) and 4 Form-C outputs, 4 contact inputs| 6T | 4 Form-A (no monitoring) outputs, 8 contact inputs| 6U | 6 Form-A (no monitoring) outputs, 4 contact inputs| 6V | 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 contact inputsCT/VT MODULES(NOT AVAILABLE FOR THE C30)| 8L | Standard 4CT/4VT with enhanced diagnostics| 8N | Standard 8CT with enhanced diagnostics| 8M | Sensitive Ground 4CT/4VT with enhanced diagnostics| 8R | Sensitive Ground 8CT with enhanced diagnosticsINTER-RELAY COMMUNICATIONS | 2A | C37.94SM, 1300 nm single-mode, ELED, 1 channel single-mode| 2B | C37.94SM, 1300 nm single-mode, ELED, 2 channel single-mode| 2E | Bi-phase, single channel| 2F | Bi-phase, dual channel| 2G | IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel| 2H | IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels| 2I | Channel 1 - IEEE C37.94, multimode, 64/128 kbps; Channel 2 - 1300 nm, single-mode, Laser| 2J | Channel 1 - IEEE C37.94, multimode, 64/128 kbps; Channel 2 - 1550 nm, single-mode, LaserTable 2–7: G30 ORDER CODES (REDUCED SIZE VERTICAL UNITS WITH PROCESS BUS)G30 - * ** - * * * - F ** - H ** - M ** - P/R ** Reduced Size Vertical Mount (see note regarding P/R slot below)NOTENOTE |
Related manuals for GE G30
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine