Operation Manual – VLANH3C S5500-EI Series Ethernet Switches Chapter 2 Voice VLAN Configuration2-7To do... Use the command... RemarksAccess portRefer to Configuring anAccess-Port-BasedVLAN.Trunk port Refer to Configuring aTrunk-Port-Based VLAN.Add theports inmanualmode to thevoice VLANHybrid port Refer to Configuring aHybrid-Port-Based VLAN.Use one of the threeapproaches.After you add an Accessport to the voice VLAN,the voice VLAN becomesthe default VLAN of theport automatically.Trunk portRefer to sectionConfiguring aTrunk-Port-Based VLANConfigurethe voiceVLAN asthe defaultVLAN ofthe port Hybrid port Refer to Configuring aHybrid-Port-Based VLAN.OptionalThis operation is requiredif the inbound voice trafficis untagged. If theinbound voice traffic istagged, do not configurethe voice VLAN as thedefault VLAN of the port.Enable the voice VLANfeature on the port voice vlan enable RequiredNote:z Only one VLAN of a device can have the voice VLAN function enabled at a time, andthe VLAN must be an exsiting static VLAN.z A port that is in a link aggregation port group cannot have the voice VLAN featureenabled.z If a port is enabled with voice VLAN and works in the manual voice VLAN mode, youneed to add the port to the voice VLAN manually to make the voice VLAN takeseffect on the port.2.3 Displaying and Maintaining Voice VLANTo do... Use the command... RemarksDisplay the voice VLANstate display voice vlan state Available in any viewDisplay the OUIaddresses currentlysupported by systemdisplay voice vlan oui Available in any view
