Operation Manual – TrackH3C S5500-EI Series Ethernet Switches Chapter 1 Track Configuration1-5Follow these steps to configure the Track-Static Routing collaboration:To do… Use the command… RemarksEnter system view system-view —Configure the Track-StaticRouting collaboration, soas to check thereachability of the nexthop of the static routeip route-staticdest-address { mask |mask-length }next-hop-address tracktrack-entry-number[ preferencepreference-value ] [ tagtag-value ] [ descriptiondescription-text ]RequiredNot configured by default.Note:z For the configuration of Track-Static Routing collaboration, the specified static routecan be an existent or nonexistent one. For an existent static route, the static routeand the specified Track object are associated directly; for a nonexistent static route,the system creates the static route and then associates it with the specified Trackobject.z The Track object to be associated with the static route can be a nonexistent one.After you use the track command to create the Track object, the association takeseffect.z If a static route needs route recursion, the associated Track object must monitor thenext hop of the recursive route instead of that of the static route; otherwise, a validroute may be considered invalid.z For details of static route configuration, refer to the Static Routing Configuration partin IPv4 Routing Configuration.1.5 Displaying and Maintaining Track Object(s)To do… Use the command… RemarksDisplay information aboutthe specified Track objector all Track objectsdisplay track{ track-entry-number | all } Available in any view
