Operation Manual – QoSH3C S5500-EI Series Ethernet Switches Chapter 3 QoS Policy Configuration3-5Note:Suppose the logical relationship between classification rules is and. Note the followingwhen using the if-match command to define matching rules.z If multiple matching rules with the acl or acl ipv6 keyword specified are defined in aclass, the actual logical relationship between these rules is or when the policy isapplied.z If multiple matching rules with the customer-vlan-id or service-vlan-id keywordspecified are defined in a class, the actual logical relationship between these rules isor.II. Configuration example1) Network requirementsConfigure a class named test to match the packets with their IP precedence being 6.2) Configuration procedure# Enter system view. system-view# Create the class. (This operation leads you to class view.)[Sysname] traffic classifier test# Define the classification rule.[Sysname-classifier-test] if-match ip-precedence 63.4.3 Defining a Traffic BehaviorTo define a traffic behavior, you need to create a traffic behavior and then configureattributes for it in traffic behavior view.I. Configuration procedureFollow these steps to define a traffic behavior:To do… Use the command… RemarksEnter system view system-view —Create a traffic behaviorand enter thecorresponding trafficbehavior viewtraffic behavior behavior-nameRequiredbehavior-name:Behavior name.This operationleads you to trafficbehavior view
