Operation Manual – NQAH3C S5500-EI Series Ethernet Switches Chapter 1 NQA Configuration1-25Failures due to other errors: 01.12.3 FTP Test Configuration ExampleI. Network requirementsUse the NQA FTP function to test the connection with a specified FTP server and thetime necessary for Device A to upload a file to the FTP server. The login username isadmin, the login password is systemtest, and the file to be transferred to the FTPserver is config.txt.II. Network diagramFigure 1-5 Network diagram for FTPIII. Configuration procedure# Create an FTP test group and configure related test parameters. system-view[DeviceA] nqa entry admin test[DeviceA-nqa-admin-test] type ftp[DeviceA-nqa-admin-test-ftp] destination ip 10.2.2.2[DeviceA-nqa-admin-test-ftp] source ip 10.1.1.1[DeviceA-nqa-admin-test-ftp] operation put[DeviceA-nqa-admin-test-ftp] username admin[DeviceA-nqa-admin-test-ftp] password systemtest[DeviceA-nqa-admin-test-ftp] filename config.txt[DeviceA-nqa-admin-test-ftp] quit# Enable the FTP test.[DeviceA] nqa schedule admin test start-time now lifetime forever# Display results of an FTP test.[DeviceA] display nqa result admin testNQA entry(admin admin, tag test) test results:Destination IP address: 10.2.2.2Send operation times: 1 Receive response times: 1Min/Max/Average round trip time: 173/173/173Square-Sum of round trip time: 29929Last succeeded probe time: 2007-03-14 13:28:48.5Extend results:
