Operation Manual – MulticastH3C S5500-EI Series Ethernet Switches Chapter 7 PIM Configuration7-39To do... Use the command... RemarksView the informationabout unacknowledgedgraft messagesdisplay pim grafts Available in anyviewView the PIM informationon an interface or allinterfacesdisplay pim interface[ interface-type interface-number ][ verbose ]Available in anyviewView the information ofjoin/prune messages tosenddisplay pim join-prune mode{ sm [ flags flag-value ] | ssm }[ interface interface-typeinterface-number | neighborneighbor-address ] * [ verbose ]Available in anyviewView PIM neighboringinformationdisplay pim neighbor [ interfaceinterface-type interface-number |neighbor-address | verbose ] *Available in anyviewView the content of thePIM routing tabledisplay pim routing-table[ group-address [ mask{ mask-length | mask } ] |source-address [ mask{ mask-length | mask } ] |incoming-interface[ interface-type interface-number |register ] | outgoing-interface{ include | exclude | match }{ interface-type interface-number |register } | mode mode-type | flagsflag-value | fsm ] *Available in anyviewView the RP information display pim rp-info[ group-address ]Available in anyviewReset PIM controlmessage countersreset pim control-messagecounters [ interface interface-typeinterface-number ]Available in userview7.7 PIM Configuration Examples7.7.1 PIM-DM Configuration ExampleI. Network requirementsz Receivers receive VOD information through multicast. The receiver groups ofdifferent organizations form stub networks, and one or more receiver hosts exist ineach stub network. The entire PIM domain operates in the dense mode.z Host A and Host C are multicast receivers in two stub networks.z Switch D connects to the network that comprises the multicast source (Source)through VLAN-interface 300.
