Operation Manual – File System ManagementH3C S5500-EI Series Ethernet Switches Chapter 2 FTP Configuration2-7Password:331 Password required for abc.Password:230 User logged in.[ftp] binary200 Type set to I.[ftp] get aaa.bin bbb.bin227 Entering Passive Mode (10.1.1.1,4,1).125 BINARY mode data connection already open, transfer starting for aaa.bin......226 Transfer complete.FTP: 5805100 byte(s) received in 19.898 second(s) 291.74Kbyte(s)/sec.[ftp] bye# You can use the boot-loader command to specify the downloaded file as the mainstartup file for next startup. Then restart the device and the startup file of the device isupdated. boot-loader file bbb.bin main rebootCaution:Startup files for next startup must be saved under the root directory. You can copy ormove a file to change the path of it to the root directory. For description of thecorresponding command, refer to the System Maintaining and Debugging part of themanual.2.3 Configuring the FTP Server2.3.1 Configuring FTP Server Operating ParametersThe FTP server uses two modes to update files when you upload files (use the putcommand) to the FTP server:z In fast mode, the FTP server starts writing data to the Flash after file transfercompletes. This protects the files intended to be overwritten on the device frombeing corrupted in the event that anomalies, power failure for example, occurduring a file transfer.z In normal mode, the FTP server writes data to the Flash during file transfer. Thismeans that any anomaly, power failure for example, during file transfer might
