Operation Manual – Information CenterH3C S5500-EI Series Ethernet Switches Chapter 1 Information Center Configuration1-6II. TimestampTimestamp records the time when system information is generated to allow users tocheck and identify system events.Note that there is a space between the timestamp and sysname (host name) fields.III. SysnameSysname is the system name of the current host. You can use the sysname commandto modify the system name. (Refer to System Maintaining and Debugging for details)Note that there is a space between the sysname and module fields.IV. ModuleThe module field represents the name of the module that generates system information.You can enter the info-center source ? command in system view to view the modulelist.Refer to Table 1-3 for module name and description.Between “module” and “level” is a “/”.V. Level (Severity)System information can be divided into eight levels based on its severity, from 0 to 7.Refer to Table 1-1 for definition and description of these severity levels. Note that thereis a forward slash between the levels (severity) and digest fields.VI. DigestThe digest field is a string of up to 32 characters, outlining the system information.Note that there is a colon between the digest and content fields.VII. ContentThis field provides the content of the system information.1.2 Configuring Information Center1.2.1 Information Center Configuration Task ListComplete the following tasks to configure information center:
