Operation Manual – IPv6 RoutingH3C S5500-EI Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration3-13To do... Use the command... RemarksEnable the logging onneighbor state changes log-peer-change RequiredEnabled by default3.7 Displaying and Maintaining OSPFv3To do... Use the command... RemarksDisplay OSPFv3debugging stateinformationdisplay debugging ospfv3Display OSPFv3 processbrief information display ospfv3 [ process-id ]Display OSPFv3 interfaceinformationdisplay ospfv3 interface[ interface-type interface-number |statistic ]Display OSPFv3 LSDBinformationdisplay ospfv3 [ process-id ] lsdb[ [ external | inter-prefix |inter-router | intra-prefix | link |network | router ] [ link-state-id ][ originate-router router-id ] |total ]Display LSA statistics inOSPFv3 LSDB display ospfv3 lsdb statisticDisplay OSPFv3 neighborinformationdisplay ospfv3 [ process-id ] [ areaarea-id ] peer [ [ interface-typeinterface-number ] [ verbose ] |peer-router-id ]Display OSPFv3 neighborstatistics display ospfv3 peer statisticDisplay OSPFv3 routingtable informationdisplay ospfv3 [ process-id ]routing [ ipv6-address prefix-length| ipv6-address/prefix-length |abr-routes | asbr-routes | all |statistics ]Display OSPFv3 areatopology informationdisplay ospfv3 [ process-id ]topology [ area area-id ]Display OSPFv3 virtuallink information display ospfv3 [ process-id ] vlinkDisplay OSPFv3 next hopinformationdisplay ospfv3 [ process-id ]next-hopAvailable in anyview
