H3C S5500-EI series Operation Manual

Also see for S5500-EI series: Operation manual Configuration guide Operation manual – port security Configuration guide Operation manual

Contents

H3C S5500-EI series Operation Manual Manual pdf 816 page image

Operation Manual – MulticastH3C S5500-EI Series Ethernet Switches Chapter 8 MSDP Configuration8-11To do... Use the command... RemarksConfigure a static RPFpeerstatic-rpf-peerpeer-address [ rp-policyip-prefix-name ]RequiredNo static RPF peerconfigured by defaultNote:If only one MSDP peer is configured on a router, this MSDP will be registered as a staticRPF peer.8.4 Configuring an MSDP Peer Connection8.4.1 Configuration PrerequisitesBefore configuring MSDP peer connection, complete the following tasks:z Configure any unicast routing protocol so that all devices in the domain areinteroperable at the network layer.z Configuring basic functions of MSDPBefore configuring an MSDP peer connection, prepare the following data:z Description information of MSDP peersz Name of an MSDP mesh groupz MSDP peer connection retry interval8.4.2 Configuring MSDP Peer DescriptionWith the MSDP peer description information, the administrator can easily distinguishdifferent MSDP peers and thus better manage MSDP peers.Follow these steps to configure description for an MSDP peer:To do... Use the command... RemarksEnter system view system-view —Enter MSDP view msdp —Configure description foran MSDP peerpeer peer-addressdescription textRequiredNo description for MSDPpeers by default