Type the device number of the device name that you want to select as the Nth bootdevice. For example, if you entered this menu by selecting 4 on the previous menu(configure 2nd Boot Device), then enter the number 3 based on the list shown above.You are thus selecting the SCSI CD-ROM device to be the 2nd (Nth) device in the bootsequence.UtilitiesThe Utilities screen enables you to select from the following system management tools.Configure Nth Boot DeviceDevice Current DeviceNumber Position Name1 1 Diskette2 2 Ethernet3 3 SCSI CD-ROM4 4 SCSI 4.5GB Hard Disk5 -.------.|X=Exit|′------'===>Utilities1 Set Passwords and Unattended Start Mode2 SCSI Spin up3 Display Error Log4 Remote Initial Program Load Setup5 Change SCSI id6 Update System Firmware7 Update Service Processor Firmware8 Select Console.------.|X=Exit|′------'===>98 User’s Guide
