Step 5. Stopping the Diagnostics1. If you are running Online diagnostics, shut down the system first using the followingprocedure:a. Press F3 repeatedly until you get to the Diagnostic Operating Instructions, thenfollow the displayed instructions.b. Press F3 once, and then follow the displayed instructions to shut down thesystem.2. If you changed any attributes on your ASCII terminal to run the diagnostics, changethe settings back to normal.3. This completes the system verification. Report the SRN (if you received one) to theservice organization. To do a normal boot, turn off the system unit and wait 30seconds, and then set the power switch of the system unit to On.Chapter 7. Using the System Verification Procedure 147
