Service Processor FirmwareFirmware Level: sh991029Copyright 1997, IBM CorporationSYSTEM NAMEMAIN MENU1. Service Processor Setup Menu2. System Power Control Menu3. System Information Menu4. Language Selection Menu5. Call-In/Call-Out Setup Menu6. Set System Name99. Exit from Menus1>Service Processor Setup MenuThe Service Processor Setup menu shown below is accessed from the Main Menu:SERVICE PROCESSOR SETUP MENU1. Change Privileged Access Password2. Change General-Access Password3. Enable/Disable Console Mirroring:Currently Disabled4. Start Talk Mode5. OS Surveillance Setup Menu6. Reset Service Processor7. Reprogram Service Processor Flash EPROM8. Serial Port Snoop Setup Menu98. Return to Previous Menu99. Exit from Menus1>Note: Unless otherwise stated in the menu responses, settings become effective whena menu is exited using option 98 or 99.PasswordsPasswords can be any combination of up to eight alphanumeric characters. You canenter longer passwords, but the entries are truncated to include only the first eightcharacters. Passwords can be set from the service processor menu or from the SystemManagement Services menus.For security purposes, the service processor counts the number of attempts to entercorrect passwords. The results of not recognizing a correct password within this errorthreshold are different, depending on whether the attempts are being made locally (atthe server) or remotely (through a modem). The error threshold is three attempts.Chapter 3. Using the Service Processor 45
