v Surveillance Setupv Modem Configurationv Call In/Call Out Setupv Site-Specific Call In/Call Out Setupv Reboot/Restart Policy SetupSurveillance SetupThis selection allows you to display and change the NVRAM settings for thesurveillance capability of the service processor.The settings allow you to:v Enable or disable surveillancev Set the surveillance time interval, in minutesv Set the surveillance delay, in minutesThe current settings are read from NVRAM (Nonvolatile Random Access Memory) anddisplayed on the screen. Any changes made to the data shown are written to NVRAM.Modem ConfigurationUse this selection when setting the NVRAM for a modem attached to any of the ServiceProcessor’s serial ports. The user inputs the file name of the modem configuration fileand the serial port number the formatted modem configuration file is read, converted forNVRAM, and then loaded into NVRAM. Refer to the Service Processor Installation andUser’s Guide for more information.Call In/Out SetupThis selection allows the user to display and change the NVRAM settings for the CallIn/Call Out capability of the service processor.The settings allows the user to:v Enable or Disable call in on either serial portv Enable or Disable call out on either serial portv Set the line speed on either serial portSite-Specific Call In/Out SetupThis selection allows you to display and change the NVRAM settings that aresite-specific for the call in/call out capability of the service processor.The site-specific NVRAM settings allow you to set the following:v Phone number for the service centerv Phone number for the customer administration centerv Phone number for a digital pagerv Phone number for the customer system to call inv Phone number for the customer voice phonev Customer account numberv Call out policyv Customer RETAIN idv Customer RETAIN passwordChapter 6. Introducing Tasks and Service Aids 121
