Open FirmwareTo enter the Open Firmware command line, press the number 8 keyafter the keyboardtext symbol displays during startup. If you have pressed the number 8 key, the OpenFirmware command line (an OK prompt) displays after the initialization and power-onself tests (POST) are complete. The Open Firmware command line can be used to setup adapters that are not configurable with the System Management Services. Youradapter documentation directs you to use this option if it is needed.Note: Your TTY must support the ISO-8859 character set to properly display languagesother than English.To enter the Open Firmware command line, you must press the F8 keyafter thekeyboard icon displays during startup.If you have pressed the F8 key, the Open Firmware command line (an OK prompt)displays after the initialization and power-on self test (POST) are complete.Note: If you have installed a privileged-access password, you are prompted for thispassword before you gain access to the Open Firmware command line.The Open Firmware command line can be used to set up adapters that are notconfigurable with the System Management Services. Your adapter documentationdirects you to use this option if it is needed.SELECT LANGUAGE1. English2. Francais3. Deutsch4. Italiano5. Espanol6. Svenska====> .------.|x=Exit|′------'Chapter 4. System Management Services 105
