After choosing which adapter to use to ping the remote system, you must provide theaddresses needed to communicate with the remote system.Change SCSI IDThis option allow you to view and change the addresses of the SCSI controllersattached to your system unit.Update System or Service Processor FirmwareThese options allow you to update your system or service processor firmware from animage on a 3.5 inch diskette. Note that you must insert a diskette containing thefirmware update image after you see a confirmation screen.To update system and service processor firmware, use the Diagnostic Service Aid underAIX. To obtain firmware updates, as well as update instructions, see the following Webaddress: http://www.rs6000.ibm.com/support/micro.Device Slot Hardware Address1. ethernet 3 0004AC5E08D22. token-ring 5 0020357A05303. ethernet Integrated 0004ACE4020B.------.|X=Exit|′------'(Press enter after making selection) ===>Ping IP Address1. Client IP Address [129.132.4.20]2. Server IP Address [129.132.4.10]3. Gateway IP Address [129.132.4.30]4. Subnet Mask [255.255.255.0].---------. .------.|E=Execute| |X=Exit|′---------' ′------'===>Chapter 4. System Management Services 103
