Note: Your ASCII terminal must support the ISO-8859 character set to correctly displaylanguages other than English.Call-In/Call-Out Setup MenuThis menu is used to configure a modem for the service processor to use to support thesystem.CALL-IN/CALL-OUT SETUP MENU1. Modem Configuration Menu2. Serial Port Selection Menu3. Serial Port Speed Setup Menu4. Telephone Number Setup Menu5. Call-Out Policy Setup Menu6. Customer Account Setup Menu7. Call-Out Test8. Ring Indicate Power-On Menu98. Return to Previous Menu99. Exit from Menus1>v Modem Configuration Menu, see “Modem Configuration Menu”.v Serial Port Selection Menu, see “Serial Port Selection Menu” on page 55.v Serial Port Speed Setup Menu, see “Serial Port Selection Menu” on page 55.v Telephone Number Setup Menu, see “Telephone Number Setup Menu” on page 56.v Call-Out Policy Setup Menu, see “Call-Out Policy Setup Menu” on page 57.v Customer Account Setup Menu, see “Customer Account Setup Menu” on page 58.v Call-out Test, see “Call-Out Policy Setup Menu” on page 57.v Ring Indicate Power-On Menu, see ″Ring Indicate Power-On Menu″ on page 50.Modem Configuration MenuTwo entries at the top of the Modem Configuration Menu display the status of thecurrent selections. Selections are made in the two sections labeled Modem Ports andModem Configuration File Name. Select the serial port that you want to activate andthen select the modem configuration file for the modem on the port. To set up bothserial ports with modems, make your selections one port at a time.For information on choosing a modem configuration file, see “Sample ModemConfiguration Files” on page 169 and “Transfer of a Modem Session” on page 173.54 User’s Guide
