8-2■ Scan typesPROGRAMMED SCANRepeatedly scans between two scan edge frequencies(scan edge memory channels PxA and PxB).This scan operates in both VFO and memory modes.SELECT MEMORY SCANRepeatedly scans all or one of 9 select memory channels.∂F SCANRepeatedly scans within ∂F span.This scan operates in memory mode.This scan operates in memory mode.This scan operates in both VFO and memory modes.ScanScan edgePxA or PxBScan edgePxB or PxAJumpMEMORY SCANRepeatedly scans all programmed memory channels.Mch 1★1Mch 5★1Mch 2★2Mch 3★1 Mch 4Mch 6★3Mch 7Mch 99★1Mch 1★1Mch 5★1Mch 2★2Mch 3★1 Mch 4Mch 6★3Mch 7★1Mch 99★1Blank channel Blank channelScanScan edgePxA or PxBScan edgePxB or PxAJumpScanScan–∂F frequency +∂F frequencyStart frequencyJumpFINE SCANScans in 10 Hz steps when squelch is open (around thesignal) while program scan or ∂F scan.This scan operates in both VFO and memory modes.AUTO MEMORY WRITE SCANAuto memory write scan operates in the same way asprogrammed scan. However, when a signal is received,the received frequency is automatically written into amemory channel in the auto write bank.This scan operates in both VFO and memory modes.Scan PauseProgramScan edgePxA or PxBScan edgePxB or PxAJumpSquelch openPRIORITY SCANContinuously switches between monitoring displayedfrequency and specified memory channel (prioritychannel).This scan operates in both VFO and memory modes.MemoryChannelPriority ChannelPriority Channel*“★1,” “★2” and “★3” show that the channelis specified as the select memory.*“★1,” “★2” and “★3” show that the channelis specified as the select memory.MODE SELECT MEMORY SCANRepeatedly scans a selected mode (ignoring othermodes) while memory scanning.This scan operates in memory mode.PauseProgramMch 1Mch A0 Mch A99Mch 5Mch 2 Mch 3 Mch 4Mch 6Mch 7Mch 99VFOFrequecyMemoryChannelMemoryChannelorUSB CWFMFMFMFSKFMFM(10 Hz steps)8 SCANS
