4-144 RECEIVE MODESDD FSK decode set modeThis set mode is used to set the decode USOS func-tion, time stamp setting, etc.• Setting contentsq During FSK mode operation, push [F-3•DECODE]to select FSK decode screen.w Push [F-1•MENU1] to select FSK decode menu2, then push [F-6•SET] to select FSK decode setmode.• Push [F-7•WIDE] to toggle the screen size from normaland wide.e Push [F-1•Y] or [F-2•Z] to select the desired setitem.r Set the desired condition using the main dial.• Push and hold [F-4•DEF] for 1 sec. to select a defaultcondition or value.• Push [F-3•Ω ≈] to select the set contents for someitems.t Push [EXIT/SET] to exit from set mode.[EXIT/SET] Main dial[F-1•Y] [F-2•Z] [F-3•Ω ≈][F-4•DEF][F-7•WIDE]• FSK decode set mode screenTurn letter code decoding after receiving a “space”(USOS; UnShift On Space function) capability ONand OFF.• ON : Decode as letter code.• OFF : Decode as character code.Selects the new line code of the internal FSK de-coder.CR: Carriage Return, LF: Line Feed• CR,LF,CR;LF : Makes new line with any codes.• CR+LF : Makes new line with CR+LF codeonly.FSK Decode USOS ONFSK Decode New Line Code CR,LF,CR+LFSet the FFT scope waveform averaging function from2 to 4 and OFF. (default: OFF)Recommendation!If you use the FFT scope waveform for tuning, use ofthe default, or smaller number setting is recom-mended.FSK FFT Scope Averaging OFFSet the color for the FFT scope waveform.• The color is set in RGB format.• The set color is indicated in the box beside the RGB scale.• Push [F-3•Ω ≈] to select R (Red), G (Green) and B (Blue),and then rotate the main dial to set the ratio from 0 to 255.FSK FFT Scope Waveform Color 51 153 255
