4-64 RECEIVE MODES■ TV channel operation A TV tuner is built-in to the IC-R9500, and connects tothe [VIDEO IN] and [VIDEO OUT] on the rear panelusing a TV jumper cable to monitor the TV programs.If you would rather use your TV tuner, connect the ex-ternal tuner to [VIDEO IN] on the rear panel.q Push [DISPLAY] once or twice to turn ON the de-sired TV screen.• Push once to turn ON the mini TV screen, push againto turn ON the full TV screen and push again to closethe TV screen.w Set the desired frequency and select WFM mode.e Push [DISPLAY] to close the TV screen.The TV display settings can be adjusted in displayset (Video) mode. (p. 11-24)DD Convenient functions for TV operation[DISPLAY] [WFM]• Preamp (p. 5-9)➥ Push [P.AMP] several times to set the preampOFF, preamp 1 ON or preamp 2 ON. OnlyON/OFF is available above 30 MHz.• “P.AMP1” or “P.AMP2” appears when the preamp 1 orpreamp 2 is ON below 30 MHz. “P.AMP ON” appearsabove 30 MHz.• Attenuator (p. 5-9)➥ Push [ATT] several times to set the attenuator in6 dB steps for HF bands, or 10 dB step for30–1150 MHz. Only 20 dB is available for1150–3335 MHz.• “ATT” and attenuation level appear when the attenu-ator is ON.• Auto notch filter (p. 5-16)➥ Push [NOTCH] switch to turn the auto notch func-tion ON or OFF.• Notch indicator (above [NOTCH] switch) lights wheneither the manual notch is ON.• VSC (voice squelch control) (p. 8-3)➥ Push [VSC] to turn the VSC function ON or OFF.• The VSC indicator appears when the voice squelchfunction is set to ON.• AFC (Auto Frequency Control) (p. 5-17)➥ Push [AFC] to turn the AFC function ON or OFF.• The AFC indicator appears when the AFC function isset to ON.
