5-45 RECEIVE FUNCTIONSDD Peak marker functionThe peak marker function can display the frequenciesof several peaks in order.q Push [EXIT/SET] several times to close a multi-function screen, if necessary.w Push [F-1•SCOPE] to select the scope screen.• The spectrum scope shows the peak level holding func-tion. Peak levels are displayed in the background of thecurrent spectrum in a different color until the receive fre-quency changes. This can be deactivated and thewaveform color can be set in scope set mode. (p. 5-7)e Push [F-6•CENT/FIX] to select center or fixedmode.r Push [F-7•PEAK] once.• Multifunction switch guide changes to the peak selec-tion guide.t Push [PEAK] to place the marker on the first peak.• Push [NEXT level] to search for the next peak level.• Push [NEXTΩ] to search for the next peak level of lowerfrequency.• Push [NEXT≈] to search for the next peak level ofhigher frequency.• Push and hold [➔RX] to overwrite the peak level fre-quency as the new center frequency.• Push [OFF] to turn OFF the maker.• “<<” or “>>” appears when the marker is out of range.y Push [EXIT/SET] to return to the previous screen.Peak frequencyPeak indicator[EXIT/SET]Multi-function switch [F-7•PEAK]
