1-2■ Front panelq POWER SWITCH [POWER] (p. 3-2)➥ Push to turn the receiver power ON.• The [POWER] indicator above this switch lights greenwhen powered ON.➥ Push for 1 sec. to turn the receiver power OFF.• The [POWER] indicator lights orange when the re-ceiver is OFF when the internal power supply isswitched ON.w REMOTE CONTROL SWITCH [LOCAL]Push to cancel remote control operation from a PCvia a CI-V data.• The [REMOTE] indicator lights yellow while in remotecontrol operation.• When the [REMOTE] indicator lights yellow, all dials,keys or switches other than this switch are disabled.e PANEL LOCK SWITCH [PANEL LOCK] (p. 9-2)Push to turn the panel lock function ON or OFF. Thepanel lock function locks all dials, keys and switchesother than [POWER] and [PANEL LOCK].• The [PANEL LOCK] indicator above this switch lightsyellow when the timer is in use.• The dial lock function is also available.r TIMER SWITCH [TIMER] (p. 10-3)➥ Turns the sleep or daily timer function ON orOFF.• The [TIMER] indicator above this switch lights greenwhen the timer is in use.➥ Enters timer set mode when pushed and held for1 sec.t RECORDER REMOTE JACK [REC REMOTE]Controls the operation of a tape recorder for record-ing. Connects to the REMOTE jack on a taperecorder.y RECORDER JACK [REC OUT]Outputs an audio signal. Connect to the AUX orLINE IN jack on a tape recorder.u HEADPHONE JACK [PHONES]Accepts standard 3.5 (d) mm ( 1⁄8 ) stereo head-phones.• Output power: 40 mW with an 8 Ω load.• When headphones are connected, the internal speakeror connected external speaker does not function.i SQUELCH CONTROL [SQUELCH] (p. 3-8)Adjusts the squelch threshold level. The squelchdisables output from the speaker (closed condition)when no signal is received.• The squelch control is particularly effective for FM orAM. It is also available for other modes.• 11 to 12 o’clock position is recommended for any set-ting of the [SQL] control.DeepDeepS-metersquelchNoise squelchSquelchis open.SquelchthresholdShallowShallowTurn the internal power supply ON before turning theunit ON from the front panel. The internal power sup-ply switch is located on the rear panel. (p. 3-2)1 PANEL DESCRIPTIONi !0qwertyuo !1 !2!3 !4 !5 !8!6 !7
