11-2011 SET MODE■ Changing the file name The file name, saved in the CF memory card or USB-memory, can be re-named from the receiver as de-sired.q During setting save screen display, push[F-1•DIR/FILE] to select tree view screen.• Push and hold [F-1•DIR/FILE] for 1 sec. once or twiceto select the CF card or USB-Memory, when USB mem-ory is Inserted.• Push [F-2•Y] or [F-3•Z] to select the desired folder.• “DECODE,” “SETTING” and “VOICE” folders are avail-able as the default.• After the folder is selected, push and hold [F-4•Ω ≈] for1 sec. to display content folder(s), if available.w Push [F-1•DIR/FILE] to select file list screen.e Push [F-2•Y] or [F-3•Z] to select the desired file.r Push [F-5•REN/DEL] momentarily to select the filename edit condition.t Push [ABC], [123] or [Symbol] to select the charac-ter group, then rotate the main dial to select thecharacter.• Push [123] or [Symbol] to toggle numerals and symbols.• [ABC] : A to Z (capital letters); [123]: 0 to 9 (numerals);[Symbol]: ! # $ % & ‘ ` ^ + – = ( ) [ ] { } _ ~ @ can be se-lected.• Push [F-1•Ω] to move the cursor left, push [F-2•≈] tomove the cursor right, push [F-3•DEL] to delete a char-acter and push [F-4•SPACE] to insert a space.• Using the receiver’s keypad, [0]–[9], can also enter nu-merals.y Push [EXIT/SET] to set the file name.[F-1•DIR/FILE][F-5•REN/DEL][F-4•Ω ≈] [F-7•WIDE][F-3•Z][F-2•Y] [EXIT/SET]
