15-7DD IP address settingIMPORTANT!: A fixed (static) IP address is used forthe IC-R9500.When you connect the IC-R9500 to a LAN, ask thenetwork manager about a usable/assignable IPaddress and the subnet mask in advance.NEVER use an IP address that has already beenallocated to another device in the network. If the IPaddress is duplicated, the network will crash.q Push [EXIT/SET] several times to close a multi-function screen, if necessary.w Push [F-7•SET] to select set mode menu screen.e Push [F-5•OTHERS] to select the others set mode.r Push [F-1•Y]/[F-2•Z] several times to select “IP Ad-dress.”t Push [F-3•Ω ≈] to select the desired segment thenrotate main dial to set the desired or specified IP ad-dress.• “192.168.0.1” is the default setting.y Push [F-2•Z] to select “Subnet Mask” item.u Rotate main dial to set the desired or specified sub-net mask.• “255.255.255.0” is the default setting.i Push [POWER] to turn the receiver power OFF,then ON to accept the new IP address and subnetmask settings.[EXIT/SET][F-2•Z][F-1•Y] [F-3•Ω ≈][F-5•OTHERS] [F-7•SET]When updating the firmware from the USB-Memory,setting the IP address is not necessary.15UPDATING THE FIRMWARE
